1
temporary
  • Industrial Facilities
    Industrial Facilities
    Reduce operation cost through efficient CHP system and distributed power generation technology Industrial facilities are generally with large factories which have great needs for electricity, heat and cold energy. Industrial facilities and district heating plants can reduce operation cost through GTL CHP system. GTL CHP units can not only provide electric energy for power demand, but also provide thermal energy for heating demand. Single power grid or boiler usually can reach the efficiency of 50%. GTL CHP system can provide you with the following: .Energy efficiency as high as 90% .Lower energy cost .Lower emission .Easy operation and maintenance .Reliable operation even under the temperature of -50℃ .Small footprint .Low noise .Fast installation For many industrial facilities, when waste heat recycling is not feasible, distributed power generation is also an economical way for power supply. In any of the following situations, especially: .Local power grid is instable; .Natural gas is a cheap alternative to grid electricity; .A lot of biogas and other combustible are produced during the production of the system itself. Major application areas of industrial facilities: Pharmaceutical factory Paper mill Petroleum and coal products Wooden products Manufacturing plants Automobile factories Chemical plants Other industries Characteristics and Advantages: Overall efficiency: 80%-90%, power generation efficiency 40% Thermal energy produced can be used for building heating, potable water heating and domestic water heating. Cascade utilization of distributed energy energy to ensure high efficiency of CHP system. High temperature energy can be converted into electric power; middle temperature energy can be used for chilling and steam heating; while low temperature energy can be used for domestic water heating and dehumidification. High economic efficiency o produce the natural gas with same heat value, the price of natural gas is 30-50% lower than that of gasoline and diesel. Annual electricity cost of CHP is 40% lower than that of mains. Low transmission loss To provide thermal energy, cold energy and electric energy locally to reduce loss of transmission and distribution (6-7%). Turn-Key solution Overall integrated solution, without having to install the engine room, small footprint, quick installation. Proven quality and reliability All the parts applied are with high quality, and proven reliable through strict. They are designed to run continuously up to 5000 hours. Easy operation and maintenance Our CHP units apply modular design which is humanized, with high safety and easy to maintain. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source absorption refrigeration equipment, can realized the trigeneration of cold, thermal and electricity energy to meet the need of domestic water heating, steam heating and chilling. Energy safety CHP system helps to realize energy diversification and ...

    2017-05-08

    read more
  • Commercial Facilities
    Commercial Facilities
    Reduce operation cost through efficient CHP system and distributed power generation technology It is very important to provide 365 days/ 24 hours thermal and electricity energy for either small hotels or five star hotels. GTL’s CHP units can provide hotels with comprehensive energy of electricity energy, thermal energy and cold energy. Hotels and other commercial facilities can reduce operation cost through GTL CHP system. GTL CHP units can not only provide electric energy for power demand, but also provide thermal energy for heating demand of commercial facilities. Single power grid or boiler usually can reach the efficiency of 50%. GTL CHP system can provide you with the following: .Energy efficiency as high as 90% .Lower energy cost .Lower emission .Easy operation and maintenance .Reliable operation even under the temperature of -50℃ .Small footprint .Low noise .Fast installation For many commercial facilities, when waste heat recycling is not feasible, distributed power generation is also an economical way for power supply. In any of the following situations, especially: .Local power grid is instable; .Natural gas is a cheap alternative to grid electricity; .A lot of biogas and other combustible are produced during the production of the system itself. Major application areas of industrial facilities: Hospitals Hotels Swimming pools and resorts Commercial office buildings Schools and colleges Governmental facilities Airports and public facilities Shopping malls Fitness clubs Airports Refrigerated warehouses Data centers Characteristics and Advantages: Overall efficiency: 80%-90%, power generation efficiency 40% Thermal energy produced can be used for building heating, potable water heating and domestic water heating. Cascade utilization of distributed energy Different utilization of high-temperature, medium temperature, and low temperature thermal energy to ensure high efficiency of CHP system. High temperature energy can be converted into electric power; middle temperature energy can be used for chilling and steam heating; while low temperature energy can be used for domestic water heating and dehumidification. High economic efficiency To produce the natural gas with same heat value, the price of natural gas is 30-50% lower than that of gasoline and diesel. Annual electricity cost of CHP is 40% lower than that of mains. Low transmission loss To provide thermal energy, cold energy and electric energy locally to reduce loss of transmission and distribution (6-7%). Turn-Key solution Turn-Key solution Overall integrated solution, without having to install the engine room, small footprint, quick installation. Proven quality and reliability Our proven spare parts will ensure 50000 hours smooth operation of your CHP units. Easy operation and maintenance Our CHP units apply modular design which is humanized and has high safety. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source abs...

    2017-05-08

    read more
  • Lighting Towers application
    Lighting Towers application
    GTL Lighting Towers application GTL  Lighting towers are widely used in outdoor activities, construction sites, railway projects, industry, coal mines, movie and television photography, rental, and disaster relief. The mast can be raised quickly and provide lighting service at the first time. Four supporting legs are designed to enhance stability even in sever wind. Equipped with PLC controller for easy operation and maintenance. Product performance Special design to reduce noise with the noise level as low as 62dBA@7m Equipped with automatic voice alarm system, high safety performance. Equipped with energy-efficient metal halide, long life, applicable to all industries. Large fuel tank to ensure at least 20 hours of continuous operation. Production selection With respect to the lamp source, our Lighting towers can be divided into halide lamp and led lamp. Halide lamp has the characteristics of small in size, high brightness, Lighting color, easy installation, and long service time; known as a new Lighting source of the 21st century, LED lamp has the characteristics of safety, long service life, low power solution, etc. With respect to the application demand of product, GTL Lighting towers can be divided into portable type, manual type, automatic lift type, road type, mine type and hybrid power supply type. Power output socket and drag rod are optional for generator sets applicable for Australia standard, Americas standards, European standards and other standards.

    2017-05-12

    read more
  • Modern Farms
    Modern Farms
    Major applications of GTL CHP in modern farms: Livestock farms Straw power generation plants Greenhouses Biogas power generation plants Characteristics and advantages: Overall efficiency: 80%-90%, power generation efficiency 40% Thermal energy produced can be used for building heating, potable water heating and domestic water heating. Cascade utilization of distributed energy Different utilization of high-temperature, medium temperature, and low temperature thermal energy to ensure high efficiency of CHP system. High temperature energy can be converted into electric power; middle temperature energy can be used for chilling and steam heating; while low temperature energy can be used for domestic water heating and dehumidification. Free resources, turning waste into treasure at the same place The gases used for power generation are mainly from animal manure, various crop residues and straws. The end user can turn the waste into treasure at the same place without transmission loss. Meantime, it can also reduce stench, help clean up the environment and reduce the incidence of disease of animals and human being. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source absorption refrigeration equipment, can realized the trigeneration of cold, thermal and electricity energy to meet the need of domestic water heating, steam heating and chilling. Fast and easy installation Overall integrated solution, without having to install the engine room, small footprint, quick installation.  Proven quality and reliability Our proven spare parts will ensure 50000 hours smooth operation of your CHP units. All the parts applied are with high quality, and proven reliable through strict. They are designed to run continuously up to 5000 hours. Easy operation and maintenance Our CHP units apply modular design which is humanized, with high safety and easy to maintain. Low transmission loss To provide thermal energy, cold energy and electric energy locally to reduce loss of transmission and distribution (6-7%).  Environmental adaptation range -50 ℃ -50 ℃ Sellable thermal energy and electricity energy The thermal energy and electricity energy produced can be sold and get according payment. Air conditioning cold water: 1-1.6 km 1 MPa steam: 12 km Heating and hot domestic water: 4-5 km (about 60℃) Provide fertilizer and improve resource  Increase organic fertilizer resources, improve quality and efficiency of fertilizer to improve crop yields and soil quality. Protect agricultural ecological Reduce trees hacking and shovel turf chaos to protect vegetation and help good development of agricultural production system. Islanding mode running Reliable power supply Independent energy supply Provide power supply for remote areas Low environmental impact GTL CHP unit's emission of sulfur dioxide and solid waste are almost zero; the emission of nitrogen oxides reduces by 80%; the floor area and water consump...

    2017-05-05

    read more
  • Data center application
    Data center application
    GTL soundproof generator set’s application in telecommunications Equipped with multiple soundproof devices, GTL soundproof generator set are silent and will not affect the daily lifes of around office workers and residents during running. Ultra-low exhaust emissions are designed to reduce pollution to the environment even operated outdoors. Reliable after-sales support GTL has developed a set of comprehensive service solutions to ensure high quality of operation, easy troubleshooting, and lower operating costs.

    2017-05-12

    read more
  •  Social Media Directory
    Social Media Directory
    Social Media Directory

    2016-09-13

    read more
  • Organization
    Organization
    Power equipment division The Power Equipment Division is responsible for providing all kinds of diesel generator sets, high voltage generator sets, gas generator sets, mobile lighting trucks and other equipment, and its plus related systems and operations throughout the world. Lighting Towers division The Lighting Towers division is responsible for sales and service of mobile Lighting towers, super-5 and related accessories. Compressor division The Compressor Division encompasses a worldwide network of industrial compressors, various types of portable Air Compressorss, gas treatment equipment and air management systems. Gas Energy Products division The Gas Energy Products division is responsible for sales and service of gas generator sets, gas CHP units and related accessories.

    2017-06-07

    read more
  • Landfill and Sewage Treatment Plant
    Landfill and Sewage Treatment Plant
    Reduce operation cost through efficient CHP system and distributed power generation technology Reduce operation cost through efficient CHP system and distributed power generation technology For sewage treatment plant producing large amount of biogas, GTL CHP units can not only provide electric energy for power demand, but also provide thermal energy for heating demand of sewage treatment plant. GTL’s CHP units can provide: Convert harmful gas into energy; Avoid transportation cost of diesel; Independent site power generation; Overall efficiency as high as 90%, power generation efficiency as high as 40%; Stable running when fluctuations occured in composition and impurities; Output can meet standard gas unit; Avoid the release of methane into the atmosphere, which is 21 times the greenhouse effect of carbon dioxide; Stable running under the ambient temperature of -50℃; Small footprint; Fast installation and operation. Major applications of GTL CHP in Waste generation: Sewage treatment plants Landfills Waste digesters Urban food waste Characteristics and advantages: Overall efficiency: 80%-90%, power generation efficiency 40% Thermal energy produced can be used for building heating, potable water heating and domestic water heating. Waste utilization and environment cleaning Biogas is produced in the process of storage and treatment in landfills and sewage treatment plants. Biogas is free resource, which can prevent stench, clean up the environment and reduce the incidence of disease of animals and human being. Low transmission loss To provide thermal energy, cold energy and electric energy locally to reduce loss of transmission and distribution (6-7%). Fast and easy installation Overall integrated solution, without having to install the engine room, small footprint, quick installation. Proven quality and reliability All the parts applied are with high quality, and proven reliable through strict. They are designed to run continuously up to 5000 hours. Easy operation and maintenance Our CHP units apply modular design which is humanized, with high safety and easy to maintain. Processed gas Biogas produced in the landfills and sewage treatment plants contains of sulfide, chloride and water vapor. Before using the gas to generate power, you must apply desulfurization, dechlorination treatment to reduce contamination to the machine and pollution to the air. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source absorption refrigeration equipment, can realized the trigeneration of cold, thermal and electricity energy to meet the need of domestic water heating, steam heating and chilling. Sellable thermal energy and electricity energy The thermal energy and electricity energy produced can be sold and get according payment. Air conditioning cold water: 1-1.6 km 1 MPa steam: 12 km Heating and hot domestic water: 4-5 km (about 60℃) Energy safety CHP system helps to realize energy diversificatio...

    2017-05-08

    read more
  • Super Five application
    Super Five application
    Super Five application

    2017-05-12

    read more
  • GTL  Vedio
    GTL Vedio
    GTL  Vedio

    2017-05-02

    read more
  • Coal Mines and Oil Field
    Coal Mines and Oil Field
    Reduce operation cost through efficient CHP system and distributed power generation technology For coal mines producing large amount of coal mine gas, GTL CHP units can not only provide electric energy for power demand, but also provide thermal energy for heating demand of sewage treatment plant. GTL’s CHP units can provide: Convert harmful gas into energy; Avoid transportation cost of diesel; Independent site power generation; Overall efficiency as high as 90%, power generation efficiency as high as 40%; Stable running when fluctuations occured in composition and impurities; Output can meet standard gas unit; Avoid the release of methane into the atmosphere, which is 21 times the greenhouse effect of carbon dioxide; Stable running under the ambient temperature of -50℃; Small footprint; Fast installation and operation. Overall efficiency: 80%-90%, power generation efficiency 40% Thermal energy produced can be used for building heating, potable water heating and domestic water heating. Waste utilization and environment cleaning Coal gas produced from coal mine and oil field can be treated to meet the demands of power generation of generators, which dramatically reduces the cost of diesel power generation. Fast and easy installation Overall integrated solution, without having to install the engine room, small footprint, quick installation. Proven quality and reliability Our proven spare parts will ensure 50000 hours smooth operation of your CHP units. All the parts applied are with high quality, and proven reliable through strict. They are designed to run continuously up to 5000 hours. Easy operation and maintenance Our CHP units apply modular design which is humanized, with high safety and easy to maintain. Processed gas After being dehydrated, decontaminated, the associated gas from coal mines and oil fields can be used as efficient and clean fuels. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source absorption refrigeration equipment, can realized the trigeneration of cold, thermal and electricity energy to meet the need of domestic water heating, steam heating and chilling. Trigeneration of cold, thermal and electricity energy Besides power supply, the CHP units when combined with heat source absorption refrigeration equipment, can realized the trigeneration of cold, thermal and electricity energy to meet the need of domestic water heating, steam heating and chilling. Waste of coal gas and oil field gas very year, up to 150 billion cubic meters associated gas in the world coal and oil industry aredirectly burnt, which causes $ 30.6 billion economic loss. Reduce emission of greenhouse gas 1 MW CHP generators can reduce more than 30,000 tons of carbon dioxide emission every year. Improve coal mine safety Complete Product configuration Complete parts management system Wide scope applications

    2017-05-08

    read more
  • Poster
    Poster
    Poster

    2016-09-13

    read more

Copyright © 2015-2019 XIAMEN GTL POWER SYSTEM CO.,LTD.

#

top